26
A100K10652
IP DECT 6000 System Installation & Configuration Guide
Figure 15 Base Station - Wall Mounting
To mount and connect the base station, do the following:
1. Mount the base station on the wall using the anchors and screws
accompanying the product.
2. Insert the RJ45 plug into the Ethernet connector at the bottom of the
base station.
,
When you place the base station on the screws, ensure that the screws do
not touch the printed circuit board.
Figure 16 Base Station - Ethernet Connector
5.3 Recording the Installation Information
After completing the installation of the base stations, record the location
of each base station and add a descriptive text in the web interface of
the Server 6000 under
Administration > Base stations
.
