59
IP DECT 6000 System Installation & Configuration Guide
A100K10652
The newly registered user/handset is now listed:
Repeat the whole procedure to register each new handset.
10.2 Subscribing Handsets
The subscription procedure for EX, Rough and Office Handsets is
carried out on the handset itself.
)
Subscription of handsets requires the use of each registered handset.
)
For subscriptions to work, the system must allow subscriptions to be made (refer
to “Server 6000 Configuration”). Some systems also require an Authentication
Code (AC). If more than one system currently permits subscription, you will need
to know the ID of the system (ARI code) to which you wish to subscribe. Authen-
tication Codes and system IDs (ARI code on the label at the rear of the Server
6000) may be provided by the system administrator.
Before subscribing handsets you need to ensure:
●
that handset battery has been charged (see “Charging Battery”). Low
battery could cause subscription problems.
●
that the handsets have been registered to the system (see
“Registering Handsets”).
10.2.1 Subscribing an EX Handset
To Subscribe a EX Handset:
1. Press
MENU
and go to
MENU LOGIN
.
2. Press
a
and go to
SUBSCRIPTION CREATE
.
3. Press
a
.
-The handset will start searching for the ARI code or serial number
of the Server 6000.
4. Use the
< >
keys to scroll between the ARI codes if there is more
than one Server 6000 available.
-
During subscription, the handset searches for free positions and
carries out subscription on the first free position.
5. As soon as the correct ARI code of the Server 6000 appears in the
display, press
a
.
-The ARI code can be found on the label at the back of the Server
6000.
6.
Enter the AC (if required) using the keypad, and press
a
.
