39
IP DECT 6000 System Installation & Configuration Guide
A100K10652
1. Press down the back cover and slide it towards the bottom of the
handset.
2. Lift off the back cover.
3. Insert the battery with its label showing.
4. Replace the back cover by pressing it back into the locked position
(when you hear a click, the back cover is in position).
Figure 19
Removing Back Cover from Office Handset
7.2.3 Installing Battery on Rough Handset
To install the battery:
1. Remove the battery cover by unfastening the four screws at the
back-bottom part of the handset.
2. Carefully remove the battery cover.
3. Insert the battery with its label showing.
4. Replace the battery cover by refastening the four screws.
7.3 Charging Handsets
7.3.1 Using the Charger
Each handset is charged using a handset charger, which is a compact
desktop unit designed to charge and automatically maintain the correct
battery charge levels and voltage.
The charger for the EX Handset is powered by an AC (115VAC or
230VAC) adapter that supplies the 9VDC at 230mA charger requirement.
The charger for the Rough/Office Handset is powered by an AC
(110VAC to 240VAC) adapter that supplies the 8VDC at 350mA charger
requirement.
Figure 20
Single Charger for EX Handset
