84
A100K10652
IP DECT 6000 System Installation & Configuration Guide
12.2.3.1 Checking Sync State
In the web interface of the Server 6000:
●
Click
Administration
, and then click
Base Station
.
At the bottom of the page, there is a color description of the various sync
states.
The sync states of the base stations are as follows:
●
Blue: Free running (Sync Master)
●
Green: Synchronized to primary (Primary Sync Master)
●
Yellow: Synchronized to secondary (Secondary Sync Master)
●
Red: Searching (not in sync with any radio unit)
●
Grey: Unknown (not connected - base station removed from
installation)
Double-click a base station in the list to check the RSSI values of the
base stations it is synchronizing on (Primary sync or Secondary sync).
12.2.4 Updating the Base Station Firmware
To update the firmware, you have to load a file to the system. Contact
your distributor for the latest firmware.
The base station firmware is updated from the
Firmware
page of the
Server 6000.
You can specify a range of base stations to be updated with the new
firmware.
To update the base station firmware:
