61
IP DECT 6000 System Installation & Configuration Guide
A100K10652
10.2.2
Rough/Office Handset Subscription
A handset can be subscribed to more than one system and will
automatically log on to the relevant system. If a handset is subscribed to
two or more systems, you can use Auto Login type A to change between
the systems automatically.
)
Auto Login A should only be used in separate systems without overlaps.
If a handset loses signal from the system (the display shows a no-signal
icon), after 20 seconds the handset will start searching for an alternative
system available from the Login list and automatically change to this
system.
)
When using Auto Login A, any call will be dropped when changing to an alternative
system.
)
Subscription of handsets requires the use of each registered handset.
)
For subscriptions to work, the system must allow subscriptions to be made (refer
to “6000 Server Configuration”). Some systems also require an Authentication
Code (AC). If more than one system currently permits subscription, you will need
to know the ID of the system (ARI code) to which you wish to subscribe. Consult
the system administrator for Authentication Codes and system IDs (ARI code on
the label at the rear of the Server 6000).
Before subscribing handsets you need to ensure that:
●
the handset battery has been charged (see “Charging Battery”). Low
battery could cause subscription problems.
●
the handsets have been registered to the system (see “Registering
Handsets”).
10.2.3 Subscribing a Rough Handset
Before starting the subscription process, register the handset in the IP
DECT server:
1. Select
Users
>
List Users
and click
New
to define a new user
without entering the IPEI number
After registering the handsets, the User List on the DECT server may
look something like this:
