54
Main characteristics
16. Main characteristics
GSM-BUS Communicator 01942
• Power supply: AC: 12 V - 24 Vac (-10%, +20% respectively)
DC: 12 V - 30 Vdc (± 10%)
Note:
The range of input ac makes the device suited to be powered with a generic trade
doorbell transformer with pulsed power greater than 20 VA (eg Vimar 16887)
If using the latter (and generally also with other trade models), connect the communicator to
the transformer's 12 Vac output
• Peak current consumption: 250 mA at 12 Vdc
• Phone communication: GSM-GPRS Quad Band phone module, E-GSM 850/900/1800/1900 Mhz,GPRS
class 10, Supply voltage: 34 V -- 42 V, External SIM CARD reader
• SMB connector for external GSM antenna
• Interface for connection to the BUS of the VIMAR By-me system
• Appliance of class III
• Protection class: IP30
• Installation: on EN 50022 rail, occupies 6 modules of 17.5 mm
• State of pollution: normal
• Ambient temperature during transport: -25 °C +60 °C
• Operating temperature: 0 °C - +40 °C
• Main functions:
°
remote control of the By-me system: air conditioning, scenarios, actuators, intrusion detection alarm system
°
SMS signalling breaks in and return of mains voltage
°
device control via SMS, with SMS confirmation message
°
device status request via SMS, with SMS reply message
°
configuration via SMS or PC
°
alarm warning via SMS or voice messages, which can be customized: sending to 8 phone numbers
External GSM antenna (supplied)
• External GSM antenna
• SMB connectors.
Rechargeable batteries (supplied)
• Two rechargeable AAA NiMH 1.2 V batteries (minimum 800 mAh)
NotE:
In the event of a supply voltage failure, the supplied batteries ensure the GSM-BUS
communicator has an operating life of some hours (starting from the condition with the bat-
teries charged)
