26
Enrolling devices
12. Enrolling By-me system devices
Note: Access to the configuration operations is possible approximately one minute after powering up the sys-
tem
12.0 Enrolling the control panels
This procedure is necessary to allow the communicator to access the control panel functions that you want to
control from a remote location An association is created between the systems SYS1, SYS2,, SYS8 that can
be managed by the phone communicator and the above-mentioned control panels installed in the system It is
possible to govern up to 8 control panels that are identified in the phone communicator with SYS1 (System no
1), SYS2 (System no 2), and so on to SYS8 (System no 8)
The device SYSn (SYS1, SYS2, SYS8) of the phone communicator must be associated with the address that
identifies the desired comfort control panel This association can be made via SMS or via the EasyTool The
above-mentioned address has the following format:
a . b . c
a
Identifies the area
b
Identifies the line
c
Identifies the control panel
On the control panels 14510, 16950, 20510, the values can be displayed in the Diagnostics-Information menu
On the control panels 01950, 01951, 01952, 01956, 01958, 01960, the area and line values can be displayed
in the Setup-Information menu, while the ID value is 170 (for a description of these values, refer to the instruc-
tions manual of the control panel)
• Send an SMS message in the form of
<user code>.SYS<n>.ID.<control panel address>
where
<n>
is the number identifying the system you want to associate with the control panel with the
address
<control panel address>
<control panel address>
must have the format
xxyyzzz
with:
xx
two digits (between 00 and 15) identifying the area
yy
two digits, between 00 and 15, identifying the line
zz
three digits, identifying the control panel
This command does not require an SMS confirmation message.
Example
If the set user code is the default 1234 and you want to make an association between SYS1 and the control
panel with address 181, send the following SMS:
1234.SYS1.ID.0108001
