39
General Configuration
Example
If the set user code is the default 1234 and you want to set the temperature level T2 of the timer-thermostat
1 to 215 °C, send the following SMS:
1234.C1.T2.21,5
The GSM Communicator will reply with the following SMS:
GSM-BUS 1/1
Temp T2 C1:
21.5 degrees
13.1.3 Setting Heating or Cooling
This is used to set the Heating or Air Conditioning function of the chosen timer-thermostat
•
Send an SMS message in the form of
<user code>.C<n>.HEAT/COOL
where
<n>
identifies the number of the timer-thermostat to configure (1,240),
HEAT
selection of the
Heating function and
COOL
selection of the Air Conditioning function
This command requires an SMS confirmation message, with the following form:
GSM-BUS 1/1
C<n> COOLING/HEATING
Example
If the set user code is the default 1234 and you want to set the timer-thermostat for the Heating function,
send the SMS:
1234.C2.HEAT
The GSM Communicator will reply with the following SMS:
GSM-BUS 1/1
C2 HEATING
13.2 Scenarios
The GSM-BUS Communicator 01942 is able from a remote location to control up to 32 scenarios of the By-me
system
The first 8 scenarios (SC1SC8) of the GSM-BUS Communicator 01942 can be associated with SMS labels for
customization, to use for sending commands In any case they can always be managed via their own predefined
label: SC1SC8 The scenarios SC9SC32 can be managed solely via the predefined labels After enrolment
(see paragraph 127), for the first 8 scenarios, the system makes the following configuration functions available:
