17
General configuration
Specifically, for the types of alarm managed:
1. Intrusion alarm.
The Intrusion voice alarm message is formed in this way
“Intrusion Alarm”
+
Msg. Address (option)
2. Tamper alarm.
The Tamper voice alarm message is formed in this way
“Tamper Alarm”
+
Msg. Address (option)
3. Technical alarm.
The Technical voice alarm messages are formed in this way
“Technical Alarm”
+
description of alarm
type (option)
+
Msg. Address (option)
The voice alarm messages (VOC) managed by the GSM-BUS communicator are divided into two groups, which
are associated with the same number of groups of call phone numbers, composed of at most 8 phone numbers
of a maximum length of 30 digits
This division enables sending the two “classes” of alarm messages to two groups of users, separating “safety”
alarm messages (intrusion and tamper alarms) from “technical” ones
Group name
Description
Alarms belonging to the group
“VOCAI” GROUP
Group of voice alarms in the category of
INTRUSION ALARMS
Intrusion alarm
Tamper alarm
“VOCAT” GROUP
Group of voice alarms in the category of
TECHNICAL ALARMS
Technical alarm 1
Technical alarm 8
Sending an alarm message (together with all those in the same group) is activated by associating the group with
at least one phone number on the list of phone numbers
Sending alarm messages can therefore be enabled or disabled according to the group to which they belong
For each group of alarm messages there are the following functions available, via SMS or PC
Note: For settings via the specific software on a PC, please refer to the relevant instructions manual
ALARM TYPE
DESCRIPTION OF ALARM TYPE
(FOR TECHNICAL ALARMS ONLY)
ADDRESS
• predefined
• depending on the type of
alarm event
• cannot be changed by the
user
• option
• can be changed by the user
(via PC)
• enables identifying the type
of technical alarm (eg, gas,
smoke, water)
• option
• can be changed by the user (via PC)
• used to add information on the user
or on the location of the dwelling to
the voice alarm message
