40
General Configuration
13.2.1 SMS label management
This is used to associate or delete an SMS label, of at most 10 characters, with the selected scenario; the pro-
cedure can take place with an SMS message or via EasyTool:
- send an SMS with the following form to associate the
<name>
with the scenario
<n>
:
<user code>.SC<n>.STR.<name>
- send an SMS with the following form to restore the predefined value of the scenario
<n>
:
<user code>.SC<n>.STR.0
This command does not require an SMS confirmation message.
Note: It is only possible to customize the SMS labels of the scenarios SC1, SC2, ,SC8
Example
If the set user code is the default 1234 and you want to associate the name “Exit” with the scenario 1, send
the SMS:
1234.SC1.STR.Exit
To delete the previously associated name, send the SMS:
1234.SC1.STR.0
13.3 Diagnostics
After enrolment (see paragraph 120), for the control panels, the system makes the following diagnostics func-
tions available
13.3.1 Status of last scan
This is used to read the number of non-operating devices that the control panel detected during the last scan
(refer to the instructions manual of the control panel)
•
Send an SMS message in the form of
<user code>.SYS<n>.?SCANNUM
where
<n>
is the index of the system associated with the control panel to query
The communicator will send the following SMS:
GSM-BUS 1/1
KO Devices: <n>
where
<n>
is the number of non-operating devices
Example
If the set user code is the default 1234 and you want to read the number of non-operating devices (3 devic-
es) detected by the control panel associated with the SYS1 system, send the following SMS:
1234.SYS1.?SCANNUM
The communicator will send the following SMS:
GSM-BUS 1/1
KO Devices: 3
