36
Enrolling devices
Example
If the set user code is the default 1234 and you want to read the associations of the scenarios (with SC1
associated with scenario 1 of the control panel of address 181 and SC2 associated with scenario 2 of the
control panel of address 181), send the following SMS:
1234.?SCSET
The communicator will send the following SMS:
GSM-BUS 1/1
SC1: sc1,1.8.1
SC2: sc2,1.8.1
12.11 Enrolling groups
This enables reading the status and control (turning on and off) actuators in the system with an SMS and via
EasyTool
The communicator is able to manage up to 8 groups, with the possibility of associating an SMS customized
label to each one of them
To activate this control it is necessary to associate the groups of the communicator (GR1,, GR8) with the
groups containing the devices to control, with the procedure of manual group enrolment
12.11.1 Manual enrolment of a group
This procedure involves entering the index of the group and the address of the related comfort control panel
Before proceeding it is necessary in the control panel to actuate the “group monitor” item in the Configuration-
Interface menu
•
Send an SMS message in the form of
<user code>.GR<n>.SET.<control panel address>.<group>
This command does not require an SMS confirmation message
Example
If the set user code is the default 1234 and you want to enrol the group that on the control panel of address
181 has index 23, associating it with group GR1 of the communicator, send the following SMS:
1234.GR1.SET.0108001.23
12.11.2 Deleting enrolment of a group
This enables deleting the association of a group, with an SMS message or via EasyTool
This operation disables communicator control of the group
•
Send an SMS message in the form of:
<user code>.GR<n>.SET.0
(zero)
This command does not require an SMS confirmation message
