52
Operation of controls
The Communicator will send an SMS confirmation message with the following format:
GSM-BUS 1/1
Intrusion detect: engaged
14.4.2 Turning off
Used to turn off the intrusion detection alarm system
•
Send an SMS message in the form of
<user code>.SAI.OFF
The Communicator will send an SMS confirmation message with the following format:
GSM-BUS 1/1
GSM-BUS 1/1
Intrusion detect: not engaged
15. Status detection
15.1 Comfort
By using the GSM-BUS Communicator 01942 it is possible to detect the status of the comfort devices in the
system
•
Send an SMS message in the form of
<user code>.C<n>.STATUS
where
<n>
identifies the number of the timer-thermostat to configure (1, 240)
The Communicator will send an SMS message with the following format:
GSM-BUS 1/1
C<n>
Meas Temp: XX,X
Set Temp: YY,Y
Mode: <Methods>
Example
If the set user code is the default 1234 and the timer-thermostat 1 is on manual operation with the tem-
perature set to 20 ºC and the measured ambient temperature 189 ºC, upon sending the command
1234.
C1.STATUS
the communicator will send the following SMS:
GSM-BUS 1/1
C1
Meas Temp: 18.9
Set Temp: 200
Mode: MAN
