49
Operation of controls
Example
If the set user code is the default 1234 and you want to set the Antifreeze operating mode of the timer-ther-
mostat 2 to a temperature of 8 degrees, send the SMS:
1234.C2.ANTIFEEZE.8
The GSM Communicator will reply with the following SMS:
GSM-BUS 1/1
C2 ANTIFEEZE
8 degrees
14.1.5 Timed off
This is used to set the switch-off at end operating mode of the chosen device (for information on the operating
mode, see the Instructions Manual of the control panel)
Note.
This function is only actuated if the thermostat is not off
•
Send an SMS message in the form of
<user code>.C<n>.OFFTIMER.XX
where
<n>
identifies the number of the timer-thermostat to configure (1, 240) and
XX
the number of hours
in which the device must keep the command mode It involves an SMS for confirmation with the following
form:
GSM-BUS 1/1
C<n> TIMED OFF,
XX hours
Example
If the set user code is the default 1234 and you want to set the Switch-Off at End operating mode for a
period of 22 hours of the timer-thermostat 2, send the SMS:
1234.C2.OFFTIMER.22
The GSM-BUS Communicator will reply with the following SMS:
GSM-BUS 1/1
C2 TIMED OFF,
22 hours
14.1.6 Temporary manual
This is used to set the temporary manual operating mode of the chosen device (for information on the operating
mode, see the Instructions Manual of the control panel)
•
Send an SMS message in the form of
<user code>.C<n>.TIMEDMAN.XX,X.YY
where
<n>
identifies the number of the timer-thermostat to configure (1, 28),
XX
,
X
the temperature to set
that can have at most two integers and one decimal place and
YY
the number of hours to set This com-
mand requires an SMS confirmation message, with the following form:
