13
General configuration
where
<language code>
has the meaning stated above,
SMS L
is the language used for the SMS mes-
sages,
VOC L
is the language used for the voice alarm messages
9.2 User code configuration
The GSM-BUS Communicator enables setting a numerical password (user code) composed of from a minimum
of 4 digits to a maximum of 10 digits providing access to its functions:
• Send an SMS message in the form of
<user code>.COD.<new code>
- If the sent code has more than 10 digits, the GSM-BUS Communicator will send the following SMS error
message:
GSM-BUS 1/1
Error:
Code too long
- If the sent code has less than 4 digits, the GSM-BUS Communicator will send the following SMS error mes-
sage:
GSM-BUS 1/1
Error:
Code too short
- If the sent code has non-numerical characters, the GSM-BUS Communicator will send the following SMS
error message:
GSM-BUS 1/1
Error:
Inadmissible characters
- If the sent code respects the required form, the GSM-BUS Communicator will send the following SMS confir-
mation message:
GSM-BUS 1/1
Code entered:
<code>
Example If the set user code is the default 1234 and you want to change it with the new code 6767, the
SMS message to send must be
1234.COD.6767
The GSM-BUS Communicator will send the following SMS confirmation message:
GSM-BUS 1/1
Code entered:
6767
