48
Operation of controls
Example
If the set user code is the default 1234 and you want to set the manual operating mode of the timer-thermo-
stat 2 to the temperature of 225 degrees, send the SMS:
1234.C2.MAN.22,5
The GSM Communicator will reply with the following SMS:
GSM-BUS 1/1
C2 MAN
22.5 degrees
14.1.3 Automatic
This is used to set the automatic operating mode of the chosen device (for information on the operating mode,
see the Instructions Manual of the control panel)
•
Send an SMS message in the form of
<user code>.C<n>.AUTO
where <n> identifies the number of the timer-thermostat to configure (1, 240)
This command requires an SMS confirmation message, with the following form:
GSM-BUS 1/1
C<n> AUTO
Example
If the set user code is the default 1234 and you want to set the automatic operating mode of the timer-ther-
mostat 2, send the SMS:
1234.C2.AUTO
The GSM-BUS Communicator will reply with the following SMS:
GSM-BUS 1/1
C2 AUTO
14.1.4 Antifreeze
This is used to set the antifreeze operating mode of the chosen device (for information on the operating mode,
see the Instructions Manual of the control panel)
•
Send an SMS message in the form of
<user code>.C<n>.ANTIFREEZE.XX,X
where
<n>
identifies the number of the timer-thermostat to configure (1, 240) and
XX
,
X
identifies the tem-
perature to set that can have at most 2 integers and one decimal place
This command requires an SMS confirmation message, with the following form:
GSM-BUS 1/1
C<n> ANTIFREEZE
XX,X degrees
