Vimar 01942, Instruction Manual

Page: 3 / 62

1
Table of Contents
1
. Description 2
2. Field of application 2
3. Content of the package 2
4. Front view 3
5. LED and push-button functions 4
6. Preliminary operations 5
61 Inserting and removing the SIMcard 5
62 Inserting the batteries 6
63 Connecting the antenna 6
7. Installation 7
71 Connections 7
8. Configuration 8
81 Predefined values 8
82 Start-up procedure 10
83 GSM signal detection 10
84 Initial data reset procedure 11
85 Using SMS 11
9. General configuration
12
91 Language configuration 12
92 User code configuration 13
93 Phone number configuration 14
94 Redirect phone number configuration 15
95 Configuring voice alarm messages 16
96 Configuring SMS alarm messages 19
10. Alarm warning 25
11. Configuration of the bus interface of the communicator and preliminary operations on the By-me control panels 25
111 BUS interface configuration 25
112 Preliminary configurations for remote control of the intrusion detection alarm system 25
12. Enrolling By-me system devices 26
120 Enrolling the control panels 26
121 Reading the address and information of the control panel 27
122 Deleting control panel enrolment 28
123 Enrolling the temperature zones of the control panels 28
124 Deleting enrolment of a temperature zone 31
125 Deleting enrolment of all the temperature zones 31
126 Reading thermostat association 31
127 Enrolling the scenario of the control panels 32
128 Deleting enrolment of a scenario 35
129 Deleting enrolment of all the scenarios 35
1210 Reading scenario association 35
1211 Enrolling groups 31
13. General Configuration
73
131 Comfort 38
132 Scenarios 39
133 Diagnostics 40
134 Technical alarm 42
135 Groups 46
14. Operation of controls 47
141 Comfort 47
142 Scenario 50
143 Groups 51
144 Intrusion detect 51
15. Status detection 52
151 Comfort 52
152 Groups 53
153 Intrusion detect 53
16. Main characteristics 54
17. Installation rules 55
18. Compliance with regulations 55
19. Application Example 56