23
General configuration
Example
If the set user code is the default 1234, the group of SMS messages of the intrusion alarms has been associ-
ated with the phone numbers 1, 2 and 3, and the group of SMS messages of the technical alarms has been
associated with the phone numbers 1 and 4, and the group of SMS messages of the power supply alarms
has been associated with the phone number 1, upon sending the SMS message:
1234.?SMS
The GSM-BUS Communicator will send the following SMS reply message:
GSM-BUS 1/1
SMSAI: 1 2 3
SMSAT: 1 4
SMSAR: 1
n
SMS text configuration:
used to customize the text of the editable parts of the SMS alarm messages The
procedure does not require any SMS message for confirmation from the communicator
•
For the ADDRESS text, send the following SMS:
<user code>.ADDR.<text>
Example
If the set user code is the default 1234 and you want to add information on the user and address to the alarm
messages with the text “Mario Rossi via Verdi 567 VICENZA”, send the following SMS:
1234.ADDR.Mario Rossi via Verdi 567 VICENZA
•
For a description of the TECHNICAL ALARMS, send the following SMS:
<user code>.AT<n>.STR.<text>
where
<n>
(from 1 to 8) is the index of the technical alarm for which you want to set an additional description
Example
If the set user code is the default 1234 and you want to add the description “GAS” to the technical alarm
AT1, send the following SMS:
1234.AT1.STR.GAS
n
Deleting SMS texts:
used to delete the text of the editable parts of the SMS alarm messages The proce-
dure does not require any SMS message for confirmation from the communicator
<user code>.?SMS
•
For the ADDRESS text, send the following SMS:
<user code>.ADDR.0
(zero)
Example
If the set user code is the default 1234 and you want to delete the ADDRESS text, send the following SMS:
1234.ADDR.0
