27
Enrolling devices
12.1 Reading the address and information of the control panel
This procedure is used to obtain information on the address, type of control panel, hardware version and soft-
ware release concerning the control panels managed by the communicator Reading the address and request-
ing information can be done either with an SMS text message or via the EasyTool
•
Reading address: send an SMS message in the form of
<user code>.?SYSID
The communicator will send an SMS with the data related to the association of the enrolled control panels:
GSM-BUS 1/1
SYS1: <control panel address>
SYS2: <control panel address>
...
Example
If the set user code is the default 1234 and you want to read the associations of the control panels (with
SYS1 associated with the control panel of address 181 and SYS2 associated with the control panel of
address 131), send the following SMS:
1234.?SYSID
The communicator will send the following SMS:
GSM-BUS 1/1
SYS1: 1.8.1
SYS2: 1.3.1
•
Reading control panel information: send an SMS message in the form of
<user code>.SYS<n>.INFO
where
<n>
is the number identifying the system whose information you want to read (address, type of con-
trol panel, hardware version and software release)
The communicator will send an SMS with the data related to the association:
GSM-BUS 1/1
SYS<n>: <control panel address>
type: <control panel type>
hw ver:<hw version>
sw ver:<sw version>
Note: The data
<control panel type>
takes the following values:
- 0, for control panels: 14510, 16950, 20510
- 1, for control panels: 01950, 01951, 01952, 01956, 01958 and 01960
Example If the set user code is the default 1234 and you want to read the SYS1 system information, send
the following SMS:
1234.SYS1.INFO
