Viessmann Vitocal 300 AWO-M-AC 301.A, Installation And Service Instructions Manual

Page: 33 / 152

33
Parameter Setting
Instantaneous heating water heater (accessory):
"Electr booster heater"
■ "Enable instantaneous heating water heater
7900" "1"
■ "Enable instant. heating water heater for central
heating 7902" "0" or "1"
"Solar"
■ "Type solar control unit 7A00" "1"
Remote controls (accessories):
"Heating circuit 1"
■ "Remote control 2003" "1"
"Heating circuit 2"
■ "Remote control 3003" "1"
"Heating circuit 3"
■ "Remote control 4003" "1"
Cooling via heating/cooling circuit M2/HC2:
■ "Cooling function 7100" "3"
■ "Enable active cooling 71FE" "1"
■ "Cooling circuit 7101" "2"
Note
Set Vitosolic 100 parameter "ANL" to
"2". Installation and service instruc-
tions, Vitosolic
System example 2, ID: 4605305_1006_01
Setting system scheme 10 (see over-
view from page 25 and Vitotronic 200
heat pump control unit service instruc-
tions)
■ 1 heating circuit
without mixer (A1/
HC1)
■ 2 heating circuits with mixer (M2/HC2,
M3/HC3)
■ DHW heating with DHW cylinder
■ Heating water buffer cylinder
■ External heat source for DHW and
central heating
■ Active cooling via a separate cooling
circuit
■ Swimming pool heating
Preparing for installation
System example 1, ID: 4605093_1006_01
(cont.)
5692 875 GB
Installation