Viessmann Vitocal 300 AWO-M-AC 301.A, Installation And Service Instructions Manual

Page: 140 / 152

140
Parameter Code Delivered condi-
tion Commis-
sioning
External heat source
Enable external heat source 7B00 0
Priority ext. heat source/instant. heating
water heater 7B01 1
Dual mode temperature external heat
source 7B02
100 (
≙
10 °C)
Enable external heat source for DHW
heating 7B0D 0
DHW
Set DHW temperature 6000
500 (
≙
50 °C)
Min. DHW temperature 6005
100 (
≙
10 °C)
Max. DHW temperature 6006
600 (
≙
60 °C)
Hysteresis DHW temperature heat pump 6007
70 (
≙
7 K)
Hysteresis DHW temperature booster
heater 6008
100 (
≙
10 K)
Start optimisation for DHW heating 6009 0
Stop optimisation for DHW heating 600A 0
Set DHW temperature 2 600C 600 (
≙
60 °C)
Temperature sensor at bottom of DHW
cylinder 600E 0
Enable booster heaters for DHW heating 6014 0
Enable electric heaters for DHW heating 6015 1
Priority DHW heating with combi cylin-
der 6016 0
Start attempts for DHW after high pres-
sure shutdown 6017 1
Operating mode cylinder primary pump 6020 Do not adjust
Solar
Type solar control unit 7A00 0
Commissioning/service reports
Control parameters report
(cont.)
5692 875 GB