Vidikron PlasmaView VP-42, Owner'S Manual

Page: 64 / 117

63
Setting the DEFAULT INPUT
This function sets the input mode at the time the power is
switched on.
Example: Setting “VIDEO2”
Perform the following operations.
Press the MENU button on the remote control to display the
MAIN MENU on the screen, then ...
1. Use the and buttons to select “SETTING 3”, then press
the MENU button. The “SETTING 3” screen appears.
2. Use the and buttons to select “DEFAULT INPUT”.
3.
To set the DEFAULT INPUT to “VIDEO2”...
Use the and buttons to select “VIDEO2”.
OSD (On Screen Display) Controls
Information
■
PROGRAM TIMER settings
DATE ......................... Set the day of the week (e.g. Sunday).
ON (hour, minutes) .... Set the time at which the power will be turned
on in the 24-hour format.
OFF (hour, minutes)... Set the time at which the power will be turned
off in the 24-hour format.
INPUT ....................... Set the input mode that will be displayed
when the timer is on.
FUNCTION ........ Set the PIXL PROTECT function.
■
To reset the program
Align the cursor with the DATE field that you wish to reset, then press
the CLEAR button.
■
To reset the data
Align the cursor with the field (ON/OFF/INPUT/FUNCTION) that
you wish to reset, then press the CLEAR button.
■
Special characters in the PROGRAM TIMER screen
• An asterisk “*” in the DATE field
An asterisk “*” means “every”. For example, “*FRI” means every
Friday and “*” means everyday.
• A hyphen “-” in the ON field or OFF field
If any hyphen remains in the ON field of OFF field, the FUNCTION
can not be set.
• A hyphen “-” in the FUNCTION field
A hyphen “-” means last mode (the mode that was last selected at the
time the power was switched off).
ZOOM
PROGRAM TIMER
SEL. ADJ. EXIT EXIT
DATE ON OFF INPUT FUNCTION
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
MON 08:30 10:30 RGB2 INVERSE