Vidikron PlasmaView VP-42, Owner'S Manual

Page: 40 / 117

Adjusting the colors
Use this procedure to adjust hue and color density for red, green,
blue, yellow, magenta and cyan. Such adjustments will not affect
the other colors. You can accentuate the green color of trees, the
blue of the sky, etc.
Example: Adjusting the color tune for blue
Perform the following operations.
Press the MENU button on the remote control to display the
MAIN MENU on the screen, then...
1. Use the
▲
and
▼
buttons to select “PICTURE ADJUST”,
then press the MENU button. The “PICTURE ADJUST” screen
appears.
2. Use the
▲
and
▼
buttons to select “COLOR CHART”, then
press the MENU button. The “COLOR CHART” screen appears.
3. Use the
▲
and
▼
buttons to select “BLUE”.
4. Adjust using the
◄
and
►
buttons.
* If neither the
◄
or
►
button is pressed within 5 seconds, the
current selection is set and the previous screen reappears.
To continue making other adjustments...
Repeat from step 3.
5.
Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
39
Information
■
DITHER settings
AUTO ....................Will automatically appraise the picture
and make adjustments.
STILL ....................Will apply the dither method suitable
for still pictures.
MOTION................Will apply the dither method suitable
for motion pictures.
DIFFUSE...............Will apply the error diffusion method.
■
Restoring the factory default settings
Select “FACTORY” under the SETTING 1 menu. Note that
this also restores other settings to the factory defaults.
OSD (On Screen Display) Controls
RED Y M 0
GREEN C Y 0
BLUE M C 0
YELLOW G R 0
MAGENTA R B 0
CYAN B G 0
RESET : OFF
COLOR CHART
SEL. ADJ. EXIT
EXIT