- If the event number does not exist in the EDL, Error 22: Invalid ED#, displays. Press
[OK] to clear the message.
- If the live tile (below) displays after you run this procedure, you were controlling a VCR
when [GO TO]+[OK] was pressed. Press [OK] to display the event.
Moving Events
After previewing your production, you may find it necessary to move some events from one location to
another. This section describes procedures for moving an individual event or a group of events.
To Move an Event From one Location to Another–
1. Display the
event to be
moved and
press [CUT].
2. Display the
new location
for the "cut"
event.
3. Press
[PASTE].
In the above example, Scene Event 003 is moved from its original location to a new location following
event 001.
When [CUT] is pressed (Step 1), the event is deleted from the EDL and placed into a temporary storage
