232 VCRs, also check the communication
speed and the character format.
The VCR may be in a high speed rewind or fast
forward and not report the time code. For
RCTC, use a different table (121-126).
The tape may have no video recorded on the
portion that is playing. Move to a portion of the
tape that contains video.
Beeper doesn't beep.
Press [SETUP] to display Setup Menu 1. Press
[down arrow] twice to display Setup Menu 2.
Move the cursor to BEEPER and press [OK]. If
either value is set to 0, press [CHG] to change it
to 1. Press [OK] to accept the change and return
to the Setup Menu, then press [SETUP] to
return to the EDL.
During a Preview or
Auto-Record, Edit
Suite pauses in the
middle of a scene.
This is probably due to a Match Frame Edit. If
you have back-to-back transitions in the EDL,
Edit Suite needs to pause in the middle of some
scenes so that it can correctly preposition the
video for the following scene. See Match
Frame Edits in the MX1 Events section of
Chapter 5.
Edit Suite is slow to
respond to button
presses.
For any unused port, change the PROTO
parameter to NONE.
EDL Event numbers
are not in sequence.
This does not matter to Edit Suite–it will
process the events based on their order in the
EDL, not on their event numbers.
To renumber the events, press [GO TO]
+[SHIFT]+ [CHANGE].
Frames in the LCD
time code display do
not increment while the
VCR is playing.
If EXT VITC or LTC is used, or if the Real
Time Counter for the VCR/camcorder does not
show frames, Edit Suite will not update the
frame field in the time code display until Play,
In, Out, GPI-M or GPI-T is pressed.
