The Jog Wheel
For VCRs that allow frame-by-frame control, the jog wheel can advance or reverse the video one frame
at a time. Depending on the VCR table you select (Appendix A), turning the jog forward at a slow speed
will advance the video from three to seven frames per revolution. Turning the jog faster will advance the
video at speeds ranging from ±1/30th x Play to standard play speed.
Note: The jog can be used only when the shuttle is in the Pause position.
A secondary function of the jog/shuttle is to trim numeric values. As a general rule, anywhere you can
make a numeric entry in Edit Suite, you can use the jog/shuttle to change that entry.
The Shuttle Ring
Again, depending on the capabilities of the VCR, the shuttle provides for forward and reverse control at
speeds ranging from ±1/30th x Play to speeds greater than ±20 x Play. When the shuttle is turned you
will feel detents at five locations. The center detent is Pause; the middle detents are Play and Reverse
Play, and the outer detents are maximum forward and reverse shuttle.
ALL STOP
Located directly to the right of the Transport Control keys is the ALL STOP key.
