Chapter 10 • Error Messages and
Troubleshooting
This chapter provides two tables to help you solve problems that may occur while using Edit Suite.
These are the Error Messages Table and the Troubleshooting Table.
The Error Messages Table lists each Error Message that displays in Edit Suite, describes the cause of the
error, and provides actions for you to take to fix the error or prevent it from occurring again. The
Troubleshooting Table lists problem symptoms that you may encounter, and provides the actions to take
to isolate, prevent, or work around the cause of the problem.
Error Messages
If Edit Suite detects an error or advisory condition, it displays an error message similar to the following.
To clear an error message, press [OK]. To redisplay the most recent error message, press [SHIFT]+[OK].
Error Message Table
#
Message, Meaning, and Action
01 Out pt before in pt
During a preview or auto-record, a scene event whose OUT time is
the same as or earlier than its IN time was detected.
Change the scene's IN and/or OUT time and rerun the preview or
auto-record. To locate the scene on the videotape, display the event in
the LCD, then press [GO TO]+[IN] or [GO TO]+[OUT].
