VCR starts to rewind to
a scene but goes into
Play before it reaches
the scene, or the VCR
rewinds to the
beginning of the tape.
Edit Suite is not receiving time code or Real
Time Counter information from the VCR while
it is in Rewind. Look at the counter on the VCR
while it is rewinding. If it stutters or goes blank,
Edit Suite will not receive the time code value.
If RCTC is used with LANC protocol, select
VCR table 121-126 (see Appendix A).
If time code is being used, the time code may
not be continuous or may be missing from a
portion of the tape. If possible, restripe the tape.
If this is not possible, use the Real Time
Counter instead of Time Code by setting
TCSRC to INT and TC to NONE.
Vertical phase
synchronization
problems on recordings.
If the Record VCR has a Time Base Corrector,
turn it off.
