Refer to Appendix D,
Edit Control Chart
, for more information about time code
and edit accuracy.
Changing the VCR Port
If you need to change the VCR port for a Scene Event, use the arrow keys to
move the cursor to the VCR Port field, then press [CHG] enough times to display
the desired port—A, B, C or D.
001 IN 00:05:22.04
A OUT 00:05:35.20
VCR Port
Event Number
Changing the Event Number
If you want to change the Event Number for a Scene Event, use the arrow keys to
move the cursor to the Event Number field, press [CHG] to activate the numeric
keys, then type in the desired number (or use the jog/shuttle and press [OK]).
The number may be any three-digit value from 001 through 999. If there is
already another event with the number you enter, Edit Suite will beep once and
redisplay the old event number.
You can have Edit Suite renumber all of your events automatically by pressing
the key combination [GO TO]+[SHIFT]+[CHG]. Renumbering events from 1 to
the end is often called Ripple Down. Chapter 6 provides more information on the
renumbering function.
