VD560 Series Inverter User Manual Function Parameter Table
- 53 -
Selection
F5-09
DI9 (expansion
card) Terminal
Function
Selection
selection terminal 1
22: Acceleration/deceleration time
selection terminal 2
23: PULSE frequency (Only effective for
HDI1)
24: Control command switch terminal 1
25: Control command switch terminal 2
26: Immediate DC braking
27: Deceleration DC braking
28: External stop terminal 1 (Only
effective for keypad control)
29: External stop terminal 2 (According to
the deceleration time 4)
30: Emergency stop
31: PID pause
32: PID integral pause
33: Reverse PID action direction
34: PID parameter switching
35: PLC pause
36: PLC state reset
37: Swing frequency pause
38: Swing frequency reset
39: Switching between speed control and
torque control
40: Torque control prohibit
41: Acceleration/deceleration prohibit
42: Reverse prohibit
43: Frequency modification prohibit
44: Counter input
45 Counter reset
46: Length count input
47: Length reset
48: Motor selection terminal
49: Reserved
50: User defined failure 1
51: User defined failure 2
52: Cleared the running time
53: Switching between two-line and
three-line mode (Switch is invalid in
running)
54~59: Reserved
0
◎
F5-10
DI1 Terminal
Mode Selection
1 Effectively
Unit’s digit: DI1
0: High level effective
1: Low level effective
Ten’s digit: DI2, same as above
0x00000
◎
