50
* The controls enabled using the commands “00” through “07” and “0A” through “0B” work in the
same manner as the output controls executed with the function settings on the balance.
The commands “08, 09” are data request commands to the balance.
* If any of the commands “00” through “07” and “0A” through “0B” have been executed, that state
will be retained until the next command is entered. However, if the balance is powered down,
the output control will return to the initial value (function set value).
* When the command “0A” or “0B” is entered, the balance initiates the interval function, and when
the same command is entered again, the balance terminates the function.
6. Various data output requests
*1
Command Main Body
C1 C2
Code
Description
Value
Response
D D 44H 44H
Date
output
If normal: Date data
E01: Command error
D T 44H 54H
Time
output
None
If normal: Time data
E01: Command error
* The printer control command is appended to the date and time output data.
(1) Date output data
*2
DATE:
mm.dd.yyyy (CR) (LF)
English
ヒツ゛ケ
: mm.dd.yyyy (CR) (LF)
Japanese (Katakana)
(2) Time output data
TIME:
ΔΔΔΔΔ
hh:mm (CR) (LF)
English
シ゛コク
:
ΔΔΔΔΔ
hh:mm (CR) (LF)
Japanese (Katakana)
Δ
: Space
*1 Either English or Japanese notation can be selected for the output data. Check the setting at
“Print Character.”
(See “9.4 Description of Compliance with ISO/GLP/GMP” on page 32.)
*2 The order of the Year, Month, and Day varies depending on the setting for the function.
