37
10.5 Use of Weight Error
When a span adjustment or span test is conducted with an external weight, its weight error is
specified so it may be taken into consideration in the adjustment or test. (See “10.3 Setup of Error
of Weight in Use” on page 34.)
(1) Keep pressing the Function key while
holding down the Zero/Tare key. When
[
] appears, release the key. The
display changes to [
].
/
+
Key released
○
g
(2) Press the Function key several times to
display [
].
Key pressed several times
(3) Press the Zero/Tare key to set the rightmost
digit to [
].
/
(4) Press the Set key to return to measurement
mode.
○
g
Caution:
If you chose the option “Do not Use Weight Error ([
]),” the weight error is automatically
interpreted as 0.00 mg.
