32
*1 Special Format, Data Length, and Stop Bit are displayed only when [
] is selected.
If [
] is chosen, the data length will be set to 8 bits and the stop bit to 2 bits.
*2 The data interval in continuous output is 0.1 to 1 second. (The interval varies depending on the
state of weighing and other factors.)
*3 Outputs once when the balance is stable, after zero (0) or a negative (-) value has been
indicated.
9.4 Description of Compliance with ISO/GLP/GMP
When [
] is selected, the following [
] - [
] are displayed before
[
].
Item Set
Value
Description
Stop output
Output of
Calibration
Result
Output result
Disable function
Data Compliant
with
ISO/GLP/GMP
Comply
English
Print Character
Japanese (Katakana)
The denotes a factory-setting.
9.5 Setup and Check of Function 1
Continuous press
Key released
g
↓
↓
/
(1) Invoking Function 1
Press and hold the Function key for several
seconds. When [
] appears, release the
key. The display changes to the indication of the
first item [
].
(2) Selecting function items and changing settings
Pressing the Function key switches the
indication to the following function item
[
]. To change the setting, press the
Zero/Tare key and alter the digit (rightmost digit).
Each press of the Function key displays a
different function item. Select the item you want to
check or change and press the Zero/Tare key to
change the setting.
(3) Returning to measurement mode
Press the Set key. The settings are updated
and you are returned to measurement mode.
g
