23
8.4 Interval Function
This function outputs data at a constant interval. It can also output the time of day simultaneously.
(See “8.5 Time Output Function” on the following page.) The interval time is expressed in [Hour:
Minute: Second].
1. Setup of interval time
(1) Press and hold down the Set key and release
the key when [
] appears.
The interval time is displayed, and the leftmost digit
flashes. The flashing digit is the one that can be
altered.
(1)
Continuous press
○
g
：
：
(2) Set a digit in the flashing position by pressing
the Zero/Tare key.
(2)
/
：
：
(3) Press the Function key. Each press to the key
moves the cursor one space to the right. If the
lowest digit is flashing, the cursor flashing will return
to the leftmost position once the key is pressed.
(3)
：
：
(4) Press the Set key. The balance saves
*1
the set
value and returns you to measurement mode.
*1 Pressing the Print key restores the original
interval time indication.
(4)
：
：
↓
○
g
2. Start of interval output
(1) Conduct the interval output after setting Interval to
[
] or [
] (see page 31).
(2) Press the Print key once.
The balance displays [
] and initiates the
interval output. While the interval output is in
progress, the [
] mark flashes. Also, the [
] mark
lights up when data is output.
○
g
○
g
