27
8.7 Percentage Mode
This function saves the weight of the reference sample as 100% and displays the measurement
value in a percentage (%) value relative to the reference sample. The unit of measurement to be
displayed is automatically selected according to the weight of the reference sample.
Execute the function after setting measurement mode to Percentage Mode [
]. (See
“9. Functions of Function 1” on page 30.)
(1) Press the Zero/Tare key to reset the indication
to zero.
Follow the same procedure when a container is
used.
/
○
％
(2) Press the Set key. The display changes to
flashing [
]. The balance is now ready for
the reference value setup.
○
％
(3) Load the reference sample and press the
Function key.
Only the [M] mark flashes, and the balance displays
[
%
] and activates the percentage
measurement mode.
(4) Unload the sample and replace it with the object to
be measured. The balance indicates the weight of
the object under measurement in a percentage (%)
value with respect to the reference sample.
％
↓
M
○
％
○
％
* Unit Displayed in Percentage Mode (Automatically selected according to the weight of the
reference sample.)
Displayed
Unit
Reference Weight Value (Percentage with respect to
the %-limit weight value)
Below the %-limit weight
1%
Over the %-limit weight up to the %-limit weight
×
10
0.1%
Over the %-limit weight
×
10 up to the %-limit weight
×
100
0.01%
Over the %-limit weight
×
100
For %-limit weight value, refer to “2. Specifications” (Page 5).
