21
8.3 Minimum Indication Switching Function
This function changes the minimum indications. Make settings under Function 1 (see page 30); the
weighing speed will increase as a rougher minimum indication is chosen. The minimum
indications vary from one unit of measurement to another.
1. Minimum indication switching method
(1) Press and hold the Function key and release the
key when [
] appears. The display changes
to [
].
(1)
Continuous press
○
g
↓
(2) Press the Function key twice to cause
[
*1
] to be displayed.
(2)
Pressed twice
↓
(3) Change the rightmost digit with the Zero/Tare
key to switch the minimum indication. The digit
can be changed by following steps [
] to [
].
[
] gives the finest indication, and roughness
increases as a larger digit is chosen.
(3)
/
Example: When the unit of measurement displayed is
[g], the following minimum indications are
produced:
Min. Indication
0.0001
g
0.0002
g
0.0005
g
0.001
g
0.002
g
For minimum indications corresponding to the other
units, refer to the next page.
(4) When setup is complete, press the Set key to
return to measurement mode.
(4)
○
g
*1 [
] is a factory-setting.
