13
6. Time and Date Setup
The time, date and ID No. (see “10.2 Setup of ID No.” on page 33) are used when printing is made
in compliance with ISO/GLP/GMP. When this data needs to be printed, make the necessary
settings or verify the current settings.
6.1 Time Setup
While the time is displayed, --- stays on. The time is displayed in 24-hour mode [Hour: Minute:
Second]. Do not set any unreal time.
1. Time display and setup
(1) Press and hold down the Function key for several
seconds. Release the key when the display changes
from [
] to [
].
(2) Press the Function key again. The display
automatically changes to indicate time after briefly
showing [
].
To go back to measurement mode without setting the
time, press the Print key.
Continuous
press
(1)
(2)
○
g
↓
↓
(3) Press the Set key to setup/change the time. First,
the leftmost position flashes, indicating the digit that
can be altered.
(4) Change the flashing digit by pressing the
Zero/Tare key.
(3)
↓
：
：
(5) Press the Function key. Pressing the key once
moves the cursor one step to the right. If the cursor is
at the final digit, it will return to leftmost position when
the key is pressed.
(4)
/
：
：
：
：
(6) Save the set value by pressing the Set key
*1
. This
saves the changes and brings up the date display
screen.
(5)
(6)
：
：
：
：
*1 Pressing the Print key restores the original time
display.
