14
2.
±
30-sec adjustment function
The
±
30-sec adjustment function serves to make fine adjustment to the internal clock. Namely,
when the current time display shows less than 30 seconds, this function discards the seconds and
advances the time by one full minute.
(1) Display the time. (See (1) and (2) in 1. Time display
and setup.)
(2) Press the Zero/Tare key.
(3) Press the Print key to return to measurement
mode.
/
：
：
↓
：
：
6.2 Date Setup
When the display shows the date, · comes on. The year is represented by the last 2 digits. The
display order can be altered using Function 1. (See “9. Functions of Function 1” on page 31.)
(1)
(2)
○
g
↓
↓
Do not set any unreal date.
(1) Press and hold down the Function key for several
seconds. Release the key when the display changes
from [
] to [
].
(2) Press the Function key twice. The display shows
[
] for 2 seconds and automatically changes
to indicate the date.
To return to measurement mode without setting a
date, press the Print key.
(3) Press the Set key. The leftmost position starts
flashing. The cursor denotes the digit that can be
altered.
(3)
↓
(4)
/
(4) Press the Zero/Tare key. Each press rotates the
digit.
(5) Press the Function key. Each press moves the
cursor to the right. If the cursor is at the final digit, it
will return to leftmost position when the key is
pressed
(6) Press the Set key. This saves the changes you
have made, and returns you to measurement mode
*1
.
(5)
(6)
*1 Pressing the Print key restores the original date
display.
○
g
