504PRO_604PRO_o-m2_00
-
504/604 PRO Baler
Make 2 or 3 smaller bales at the end of the field
Do this for the last 2 or 3 bales on the field:
1. Stop the tractor when the bale is at the size you want to make it.
2. Push the
button to start wrapping.
3. Eject the bale.
Make 1 larger bale at the end of the field
1. Make sure manual bale wrapping is active (to switch from automatic baling push the button
).
2. Drive the tractor until all crop material is picked up.
3. Stop the tractor.
4. Push the
button to start wrapping.
5. Eject the bale.
10.2
Eject a Bale
DANGER:
Electrocution possible. Keep baler at least 10 ft (3 m) away from power lines.
WARNING:
Opening tailgate can crush, resulting in death or serious injury. Stay away from rear of baler. Warn others to
stay away before raising tailgate.
WARNING:
Never eject a bale where it can roll. A rolling bale can be destructive and result in death or serious injury.
Never try to stop a rolling bale. The area behind the baler should be clear before opening tailgate.
After a bale is wrapped (see page 9-7) the bale must be ejected.
1. Make sure it is safe to open the tailgate and there is no person in the swivel range, no power line nearby and the bale can not roll or tilt and
injure someone.
https://tractormanualz.com
Summary of Contents for 504 PRO
Page 153: ...https tractormanualz com ...
