504PRO_604PRO_o-m2_00
-
504/604 PRO Baler
Operating the Machine Baler 9-7
9.6
Adjust Baler Settings on the Control
On the controller in the tractor set the following:
1. Push the button
to go to the Bale settings page.
(Or on the home page of the E-link Control push
+
.)
2. Make all the settings (see page 5-12).
3. Push
to go to the Statistics/field data page.
(Or on the home page of the E-link Control push
and select the line
“
Field
”
.)
4. Enter or select the field (or customer) for more information (see page 5-14).
5. If necessary to change the wrapping, push
to go to the Tasks page.
(Or on the home page of the E-link Control push
and select the line
“
Field
”
)
6. Select the wrapping.
7. Push
to go to the home page.
(Or on the E-link push
several times until the home page is displayed.)
For more information (see page 5-7), (see page 5-12), (see page 5-14),(see page 5-15)(see page 5-17),
9.7
Operate Tailgate on Baler
WARNING:
Tailgate and ejected bale can crush. Proceed with particular care when opening and closing. No persons may
stay in the operating range of the tailgate and in the bale unloading area. In case of locations on a slope: Never eject a
bale where it can roll. A rolling bale can be destructive and result in death or serious injury . Never try to stop a rolling
bale.
https://tractormanualz.com
Summary of Contents for 504 PRO
Page 153: ...https tractormanualz com ...
