AC70 VC CONTROL FREQUENCY INVERTER MANUAL INSTALLATION AND WIRING
21
11
9
70
111
64
14
2
75
Mouth for keyboard with box
AC70-T3-160G/630P
Mouth for keyboard with box
AC70-T3-015G/132P
Mouth for keyboard with box
Chart 3-14:AC70 series inverter mouth for 2 line LED keyboard dimension
Note: LCD keyboard total same size as LED keyboard.
Dismantle and install tail-hood
Installation: First the tail-hood upwardly inclines around 15
degrees and inserts the top fixed flat into the fixed hole in the
front cover. Then slightly press the tail-hood downward. While
your hear "Ka", it means that the tail-hood is into the place.
Chart 3-15:AC70 series inverter tail-hood installation
Dismantlement: At the tail of the frequency inverter, there is a
special dismantlement hole design. Put your finger into the
hole, upwardly pull the cover with a little force until the buckle
between the tail-hood and the crust tear off, and then remove
the tail-hood down.
Chart 3-16:AC70 series inverter tail-hood dismantlement
