Vector VEC-VA Series, Programming Manual

Page: 74 / 649

VA Motion Controller Programming Manual
69
S Set (save) Execute the action code ontology or set the Boolean
variable. This ( set ) state is saved once the ( associated ) step
becomes active . This set state can only be explicitly reset by
associating the action to ADifferent step by using the '
R '
qualifier.
L Time-limited As long as the step is active, the action code body is
executed or the Boolean variable is set, but the duration can
be kept for at most a period of time.
D Delayed After the set delay time elapses, the action code body is
executed or the Boolean variable is set. As long as the step is
active, the action remains active. If the time when the step is
active is shorter than the set delay time, the action does not
become active.
P pulse WheNStep one becomes active, the action code body
executes an operation cycle, or a Boolean variable sets an
operation cycle.
SD Save and delay After the step is activated, when the set delay time
elapses, the action code body is executed or the Boolean
variable is saveDAnd set, even if the step becomes inactive
again. This action will remain active until it is reset. If the
time when the step is active is shorter than the set delay time,
the action will become active anyway.
DS Delay and save After the step is activated, when the set delay time
elapses, the action code body is executed or saved.
SL
Save and time
limit As long as the step is active, execute the action code
ontology or set and save the Boolean variable in a fixed time
interval. If the time when the step is active is shorter than the
question at that time, the action will be active in the interval
at any time. If the action is reset at this time, the action will
immediately become inactive.