Vector VEC-VA Series Programming Manual Download Page 3

Page: 3 / 649

Foreword

Thank you for purchasing VA motion controller! VA motion-controlled PLC is

the company developeDA high-performance general-purpose controller with an

integrated function motion controller and PLC controller. This programming

manual movement control described VA type PLC and motion control software use.

Please read carefully before using the user understand the VA motion control PLC

type of use.

safety warning

Note of warning, in order to avoid injury to the operator and other personnel, to

prevent damage to the machine.



The following "Danger" and "Warning" symbol is in accordance with the

degree of risk that the accident marked.

Danger

It Indicates a potentially hazardous situation that, if not

avoided, will result in death or serious injury.

warning

It indicates a potentially hazardous situation that, if not

avoided, will result in minor or moderate injury, or material
damage.

This symbol indicates a prohibiteDAction.

Summary of Contents for VEC-VA Series










































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VEC-VA Series

Reviews:

Related manuals for VEC-VA Series

Brands by name

Popular brands

Vector VEC-VA Series, Programming Manual

Search results

Summary of Contents for VEC-VA Series

Reviews:

Related manuals for VEC-VA Series

Brands by name

Popular brands