DESC:
PAGE:
REV
9 of 12
Assy, Chassis
5
PREPARED BY: HOWIE PLITSCH REVISED BY:
CONTROL: INDUSTRIAL ENGINEERING
REV. DATE:
SHOWN
-
10 - 27 - 00
Arden Yambao
DOC: 03-925700-01
12-901161-00
03-925565-01
03-925314-01
21-128961-00
17-699907-00
03-925229-01
DUCT, VENT (*)
03-925332-01
PARTITION, VENT (*)
RIVET, 1/8 X 1/8 AL/AL
SCR, SEM, 6-32 X 3/8
03-925306-01
3800 VENT MOTOR
BEARING, NYLON SLEEVE
ASSY, VENT DOOR
COUPLING, FLEXIBLE
NOTES:
1. WHEN ASSEMBLE THE FLEXIBLE COUPLING (03-925565-
01) ONTO THE VENT DOOR ASSEMBLY (03-925314-01) SHAFT,
MAKE SURE IS FLUSH AGAINST SHOULDER OF SHAFT.
TIGHTEN SCREW ON COUPLING TO I0 IN-LB TORQUE.
2. WHEN INSTALLING VENT MOTOR INTO THE FLEXIBLE
COUPLING, MAKE SURE MOTOR SHAFT END TOUCHES VENT
SHAFT END. PRIOR TO TIGHTEN THE SCREW ON COUPLING
CHECK TO MAKE SURE THE SCREW IS ON THE FLAT SUR-
FACE OF THE VENT MOTOR SHAFT. TIGHTEN SCREW ON
COUPLING TO 10 IN-LB TORQUE.
3. INSPECT CONNECTORS FOR BROKEN TEETH.
4. FOR FIELD SERVICE ACCESS MAKE SURE SCREW ON
COUPLING IS FACING OUT.
3
4
SCREWS SHOULD
FACE OUT.
