DOC: 03-925609-00
DESC:
PAGE:
REV
2 of 17
Assembly Procedure
3
PREPARED BY: Sax Makthepharack REVISED BY:
CONTROL: INDUSTRIAL ENGINEERING
REV. DATE:
SHOWN
-
02 - 03 - 00
Sax Makthepharack
O-RING INSPECTION
NOTES: (UNLESS OTHERWISE SPECIFIED)
1. DO NOT TOUCH BAKED O-RINGS AT ANY TIME.
2. REMOVE BOTH TYPES OF BAKED O-RINGS FROM STORAGE JAR WITH
TWEEZERS.
3. INSPECT BOTH SIDES OF THE BAKED O-RING FOR CRACKS UNDER
UNDER A MICROSCOPE.
4. CLEAN BAKED O-RINGS BY INSERTING A PIECE OF PEEK TUBING
THRU CENTER OF O-RING AND SPRAY THOROUGHLY WITH
“DUST OFF” (AS SHOWN).
5. ONLY CLEAN WHAT WILL BE IMEDIATELY USED.
6. WHENEVER O-RINGS ARE USED, USE “DUST-OFF” TO CLEAN PART
SURFACE BEFORE AND AFTER ADDING O-RINGS.
PEEK TUBING
“DUST-OFF”
O-RINGS
