Vacon 100 INDUSTRIAL Installation Manual Download Page 78

Page: 78 / 116

To release the fan from the cover plate, remove the

4 screws.

A. The fan cable

Release the grommet on the fan cable from the

cover plate and pull out the cable.

Replace the main fan. Attach the screws.

Re-assemble the drive and connect the cables.

7.6.3.2

Replacing the fans in MR9

Here are the instructions on how to replace the fans of the drive.

REPLACING THE FAN POWER SUPPLY, MR9

Remove the cover of the AC drive.

Disconnect the cables from the fan power supply.

)

Disconnect the fan supply cable from

connector X81.

)

Disconnect the fan driver cable from connector

X61.

)

Disconnect the DC supply cable from connector

X8.

Remove the 4 screws that hold the fan power

supply.

X81
X61

A. The 4 screws

Lift off the fan power supply.

Replace the fan power supply. Attach it with the

screws.

Connect the cables and put the cover of the drive

back.

REPLACING THE MAIN FAN, MR9

Remove the cover of the AC drive.

VACON · 78

COMMISSIONING AND ADDITIONAL INSTRUCTIONS

TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205

Summary of Contents for 100 INDUSTRIAL





















































































































Search results

Summary of Contents for 100 INDUSTRIAL

Reviews:

Related manuals for 100 INDUSTRIAL

Brands by name

Popular brands

Vacon 100 INDUSTRIAL, Installation Manual

Search results

Summary of Contents for 100 INDUSTRIAL

Reviews:

Related manuals for 100 INDUSTRIAL

Brands by name

Popular brands