Vacon 100 INDUSTRIAL, Installation Manual

Page: 30 / 116

NOTE!
If you have multiple cabinet sections (for example with MR12 or top cabling
sections), these steps must be done for each section.
A
B
D
B
C
Fig. 16: The fixing points of the cabinet
A. The 4 fixing points at the bottom
B. The 2 fixing points at the front bottom
C. The 2 fixing points at the rear top
D. The 2 fixing points in the fixing bracket
4.5 COOLING AND FREE SPACE AROUND THE AC DRIVE
The AC drive produces heat in operation. The fan circulates air and decreases the
temperature of the drive. Make sure that there is sufficiently free space around the drive.
Some free space in front of the drive is also necessary for maintenance. You must also have
80 cm of free space in front of the cabinet to be able to open the cabinet door. When you have
2 or more drives, you can install them side by side.
Make sure that the temperature of the cooling air does not become higher than the
maximum ambient operating temperature or lower than the minimum ambient operating
temperature of the drive.
VACON · 30 MOUNTING
4
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205