Vacon 100 INDUSTRIAL Installation Manual Download Page 73

Page: 73 / 116

Find the 2 EMC jumpers on the EMC board. They

are not adjacent to each other. Remove the EMC

jumpers.

A. The EMC jumpers

If you change the EMC level, write "The EMC level

was changed" and the date on the "product

changed" label. If the label is not attached at this

time, attach it on the drive near the name plate.

Product modified

Date:

7.5.3

THE EMC JUMPER IN MR10 AND MR12

Change the EMC protection of the AC drive from level C3 to level C4.

FINDING THE EMC JUMPER, WITH AN EXTENSION BOX

Remove the covers of the AC drive.

•

In MR12, do these steps for each power unit.

Also remove the fuse switch linkage.

COMMISSIONING AND ADDITIONAL INSTRUCTIONS

VACON · 73

24-HOUR S358 (0)201 212 575 · EMAIL: [email protected]

Summary of Contents for 100 INDUSTRIAL





















































































































Search results

Summary of Contents for 100 INDUSTRIAL

Reviews:

Related manuals for 100 INDUSTRIAL

Brands by name

Popular brands

Vacon 100 INDUSTRIAL, Installation Manual

Search results

Summary of Contents for 100 INDUSTRIAL

Reviews:

Related manuals for 100 INDUSTRIAL

Brands by name

Popular brands