Vacon 100 INDUSTRIAL, Installation Manual

Page: 5 / 116

TABLE OF CONTENTS
Preface
About this manual 3
About the product 3
1 Approvals 7
2 Safety 9
2.1 The safety symbols used in the manual and the drive 9
2.2 Warning 9
2.3 Caution 10
2.4 Grounding and earth fault protection 11
2.5 Using an RCD or an RCM device 12
3 Receiving the delivery 13
3.1 Package label 13
3.2 Type designation code 14
3.3 The contents of the delivery 14
3.4 Storage 14
3.5 Removing the packaging and lifting the AC drive 15
3.5.1 Weight of the AC drive 15
3.5.2 Lifting the AC drive 15
3.6 "Product modified" label 17
3.7 Disposal 17
4 Mounting 18
4.1 Dimensions of the cabinet, IEC 18
4.2 Dimensions of the cabinet, NAM 20
4.3 The options 24
4.4 Installation of the cabinet 29
4.5 Cooling and free space around the AC drive 30
4.6 The optional back channel cooling 32
4.6.1 Using the back channel for cooling 32
5 Power cabling 35
5.1 Cable dimensioning and selection 35
5.1.1 Cable and fuse sizes, IEC 35
5.1.2 Cable and fuse sizes, NAM 42
5.2 Brake resistor cables 48
5.3 Preparing for the cable installation 50
5.4 Cable installation in MR8-MR12 51
5.4.1 Installing the cables 55
6 Control compartment 60
6.1 The control compartment of the enclosed drive 60
6.2 Fieldbus connection 63
6.2.1 Using fieldbus through an Ethernet cable 63
6.2.2 Using fieldbus through an RS485 cable 64
TABLE OF CONTENTS VACON · 5
24-HOUR S358 (0)201 212 575 · EMAIL: VACON@VACON.COM