2
Disconnect the cables from the fan power supply.
3
Remove the 12 screws from the fan cover plate.
Use the handle to lift off the main fan unit.
1
2
2
3
3
4
To release the fan from the cover plate, remove the
4 screws.
A
A. The fan cable
5
Release the grommet on the fan cable from the
cover plate and pull out the cable.
6
Replace the main fan.
a
)
When you re-attach the main fan unit, make
sure that the sealing tape under the fan plate is
in good condition.
b
)
Attach the screws in the tightening order that
is marked in the figure of the main fan unit (1 >
2 > 3).
7
Re-assemble the drive and connect the cables.
7.6.3.3
Replacing the fans in MR10 and MR12
Here are the instructions on how to replace the fans of the drive.
COMMISSIONING AND ADDITIONAL INSTRUCTIONS
VACON · 79
24-HOUR S358 (0)201 212 575 · EMAIL: [email protected]
7
Summary of Contents for 100 INDUSTRIAL
Page 1: ...vacon 100 ac drives installation manual enclosed drives ...
Page 2: ......
Page 4: ...VACON 4 TEL 358 0 201 2121 FAX 358 0 201 212 205 ...
Page 115: ......
