Revision: 1.00
Copyright 2015 U.S. Robotics Corporation
11 |
P a g e
MODE
For the gateway embedded web interface:
Internet Explorer 9
Safari 5.1
Firefox (Windows 21.0, Mac 12.0)
Chrome (Windows 27.0.1453.110, Mac 26.0.1410.65)
Opera (Windows 12.02, Mac 12.10)
Installation Overview
Bypass Modemulator to use Gateway Mode
The USRobotics Courier Modemulator & 3G M2M Cellular Gateway can bypass the Modemulator logic
to operate as a USR3510 cellular gateway.
To put the Modemulator into gateway mode, move the MODE switch to the
right
if not already there.
With power applied to the gateway, the MODE LED will be red when the Modemulator is switched into
gateway mode.
To install the base unit:
1.
Attach the antennas
.
2.
Install the SIM
, if your wireless operator is using a SIM card, or make sure that a service plan is
associated with your device (for Sprint and Verizon).
3.
Register the Gateway
on the Provisioning Server.
4.
Power on the Gateway
.
5.
Connect the Gateway to a laptop
and log in to the embedded web interface.
6.
Select a wireless operator
in the 3G Connection tab.
For operators using a SIM card, the network settings will populate automatically for most SIM
cards. Check the settings of the APN , Username and Password. Update them if appropriate.
Click
Save changes
.
Learn more about 3G network settings
Before installing your gateway device, read the safety guidelines carefully. Not following these
guidelines can cause harm to the gateway, yourself or other persons.
